Generac — Clean Spark Arrestor Screen
Maintenance
From a Generac owner's manual covering: IQ5200DF, iQ3800, iQ3800 DF, iQ5200. Check it applies to your exact model before use.
Browse Generac generators & specs →
Before you start
- Do not use a defective screen.
Procedure
- Remove exhaust panel (A) by removing screws using a Phillips head screwdriver.
- Remove the clamp to remove retainer.
- Slide spark arrestor screens out from the muffler outlet tube.
- Inspect screens and replace if torn, perforated or otherwise damaged. If not damaged, clean with a commercial solvent.
- Replace the screens, and retainer, and secure with clamp.
Tools required
Tool links are Amazon searches (affiliate links); manufacturer special tools may only be available from a dealer.
Specs & values
- Inspect and clean the screen every 100 hours or six (6) months, whichever comes first
Source: Generac owner's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.