Generac — Check Fuel Pump
Testing & diagnosis
From a Generac service manual covering: Craftsman 2200i C0010020, Craftsman 3000i C0010030, GP2200, GP3000i, GP3500iO, IQ3500, PRO-3000i INV3000DMN, Premier 2200i INV2200DMN, iQ2000, iQ3500, iX 1600, iX 2000…. Check it applies to your exact model before use.
Applies to: Generac GP3000i, Generac GP3500iO, Generac IQ3500, Generac iX 1600, Generac iX 2000
Before you start
- Explosion and Fire. Fuel and vapors are extremely flammable and explosive. Add fuel in a well ventilated area. Keep fire and spark away.
Procedure
- Open side panel to expose carburetor (A) and fuel pump (B).
- Carefully remove fuel line from filter on inlet side of carburetor.
- Using a suitable container, slowly pull on recoil cord and turn engine over; fuel should flow from fuel line.
- If fuel does not flow, verify fuel is available to pump; inspect fuel filter and pulse line.
- If fuel does not flow, replace fuel pump.
Tools required
- suitable fuel container Amazon
Tool links are Amazon searches (affiliate links); manufacturer special tools may only be available from a dealer.
Full service-parts list: Generac GP3000i →, Generac GP3500iO →, Generac IQ3500 →, Generac iX 1600 →, Generac iX 2000 →
Source: Generac service manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.