Facts About Generators
GeneratorsDirectoryCompareRepairEnginesControllersPartsManufacturersGuides
Search models or part #
Home›Repair guides›Generac›Changing the Engine Air Cleaner

Generac — Changing the Engine Air Cleaner

Maintenance · air filter

From a Generac owner's manual — check it applies to your exact model before use.

Applies to: Generac 7.5 kW PowerPact

Parts for this job

Part numbers from the service-parts list for Generac 7.5 kW PowerPact. Verify against your serial number before ordering; some links are affiliate links.

Procedure

  1. Remove top lid with generator shut down
  2. Disengage wire clip and remove air cleaner access cover
  3. Remove old air filter and discard
  4. Clean air cleaner enclosure of dust/debris without letting debris fall into intake
  5. Install new air filter
  6. Install air cleaner cover and engage wire clip
  7. Install enclosure top lid, tighten fasteners securely
  8. Place generator in AUTO

Full service-parts list: Generac 7.5 kW PowerPact →

Source: Generac owner's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.

More Generac repair guides →