Home›Repair guides›Generac›Battery Maintenance

Generac ASPAS1CCL015 — Battery Maintenance

Maintenance

For the Generac ASPAS1CCL015, from the Generac owner's manual.

Browse Generac generators & specs →

Before you start

  • DO NOT USE TAP WATER IN BATTERIES.
  • Batteries give off explosive hydrogen gas; no smoking, flame or sparks near the battery.

Procedure

  1. Inspect the battery posts and cables for tightness and corrosion. Tighten and clean as necessary.
  2. Check the battery fluid level of unsealed batteries and fill with DISTILLED WATER ONLY.
  3. Have the state of charge and condition checked with an automotive-type battery hydrometer.

Tools required

  • Automotive-type battery hydrometer Amazon

Tool links are Amazon searches (affiliate links); manufacturer special tools may only be available from a dealer.

Specs & values

  • Recommended battery: Group 26, 12V negative ground, 525 CCA/75 AH minimum

Source: Generac owner's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.

More Generac repair guides →