Generac 9344 — Rotor Removal (Units with 15 Inch Stator)
Repair & overhaul · Rotor and flexible coupling
For the Generac 9344, from the Generac service manual.
Applies to: Generac 9344
Procedure
- Remove the four flanged nuts from the studs.
- Pull the rotor, with flexible coupling attached, free of the flywheel.
- To remove the flexible coupling from the rotor, remove four hex head flanged bolts.
Full service-parts list: Generac 9344 →
Source: Generac service manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.