Generac 8kW Air-Cooled — Cleaning the Generator
Maintenance
For the Generac 8kW Air-Cooled, from the Generac service manual.
Applies to: Generac V-Twin engine
Before you start
- Do not use sprayed water to clean the generator.
Procedure
- Loosen caked or greasy dirt with soft brush or damp cloth.
- Use vacuum system to clean up loosened dirt.
- Remove dust and dirt using dry, low pressure air at 25 psi maximum.
- Do not use sprayed water to clean generator.
Tools required
Tool links are Amazon searches (affiliate links); manufacturer special tools may only be available from a dealer.
Specs & values
- 25 psi maximum
Source: Generac service manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.