Generac 6.8 L / QT 130kW — Check Engine Oil Level
Maintenance · Engine crankcase
For the Generac 6.8 L / QT 130kW, from the Generac owner's manual.
Applies to: Generac V-type engine
Before you start
- DO NOT FILL ABOVE THE "FULL" MARK.
Procedure
- Remove oil dipstick and wipe dry with a clean, lint-free cloth.
- Install oil dipstick, then remove again.
- Oil should be between FULL and ADD marks.
- If oil is below the ADD mark, remove oil fill cap and add recommended oil to FULL mark.
Tools required
- clean, lint-free cloth Amazon
Tool links are Amazon searches (affiliate links); manufacturer special tools may only be available from a dealer.
Specs & values
- Check at least every 20 hours of operation, or prior to use
Source: Generac owner's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.