Generac — 5a through 5c of “TESTING ALL STATOR WINDINGS

For these Generac models: 13/13 kW, 15/16/18 kW, 15A, 6/7 kW, 9/10 kW, GT-990.

Browse Generac generators & specs →

Procedure

1. Repeat Step 1 at Pin Location 5 (Wire 6) and Stator
2. Connect the red test probe to Stator Lead 33. Connect

Source: manual:Generac Diagnostic Repair Manual 0G4338.pdf. Figures and steps are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.