Facts About Generators
GeneratorsDirectoryCompareRepairEnginesControllersPartsManufacturersGuides
Search models or part #
Home›Repair guides›Generac›Replace Air Filter Element

Generac 2.4 L / 60kW 1.5L — Replace Air Filter Element

Maintenance · Air Cleaner

For the Generac 2.4 L / 60kW 1.5L, from the Generac owner's manual.

Applies to: Generac 2.4 L, Generac 2.4L engine, Generac 1.5L engine

Parts for this job

Part numbers from the service-parts list for Generac 2.4 L. Verify against your serial number before ordering; some links are affiliate links.

Procedure

  1. Remove wing nut, lock washer, and flat washer from threaded rod to release air cleaner cover.
  2. Remove air filter element and discard.
  3. Thoroughly clean air cleaner cover of any dust, dirt, or debris.
  4. Place new air filter element against adapter flange.
  5. Install air cleaner cover over threaded rod.
  6. Install flat washer, lock washer and wing nut; tighten wing nut until snug.

Full service-parts list: Generac 2.4 L →

Source: Generac owner's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.

More Generac repair guides →