Generac 2.4 L / 60kW 1.5L — Install Battery
Installation
For the Generac 2.4 L / 60kW 1.5L, from the Generac owner's manual.
Applies to: Generac 2.4 L, Generac 2.4L engine, Generac 1.5L engine
Before you start
- Always connect positive battery cable first to avoid spark
Parts for this job
Part numbers from the service-parts list for Generac 2.4 L. Verify against your serial number before ordering; some links are affiliate links.
Procedure
- Loosen the two screws with nylon washers to release hold-down clamp from battery tray.
- Install battery onto tray.
- Install the two screws with nylon washers to secure hold-down clamp to battery tray.
- Install positive battery cable (red) to positive (+) battery terminal.
- Install negative battery cable (black) to negative (-) battery terminal.
Full service-parts list: Generac 2.4 L →
Source: Generac owner's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.