Generac 006000-0 — Changing the Oil
Maintenance · Engine
For the Generac 006000-0, from the Generac owner's manual.
Browse Generac generators & specs →
Before you start
- Hot oil may cause burns. Allow engine to cool before draining oil.
Procedure
- Clean area around oil drain plug.
- Remove oil drain plug from engine and oil fill plug to drain oil completely into a suitable container.
- When oil has completely drained, install oil drain plug and tighten securely.
- Fill engine with recommended oil.
- Wipe up any spilled oil.
- Dispose of used oil at a proper collection center.
Specs & values
- Change oil after first 30 hours and every 100 hours thereafter
Source: Generac owner's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.