Generac 004583-0 — To Start the Engine
Operation · Generator
For the Generac 004583-0, from the Generac owner's manual.
Browse Generac generators & specs →
Before you start
- Never start or stop engine with electrical devices plugged in AND turned on.
Procedure
- Unplug all electrical loads from receptacles.
- Make sure unit is in a level position.
- Open the fuel shut-off valve.
- Set Idle Control switch to OFF.
- Move engine CHOKE knob to Full Choke position.
- Press and hold Start/Run/Stop switch in Start position.
- Release switch to run position when engine starts.
- Move choke to 1/2 Choke, then to Run when engine runs smoothly.
Source: Generac owner's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.