Generac 004582 / 12 DTA — Testing GFCI Receptacle
Maintenance
For the Generac 004582 / 12 DTA, from the Generac owner's manual.
Browse Generac generators & specs →
Procedure
- Plug a test lamp into the GFCI receptacle.
- Start generator; lamp should be on.
- Press Test button; lamp should shut off and yellow trip indicator on.
- Press Reset button to restore power.
- If GFCI fails test, do not use receptacle; contact service dealer.
Tools required
- test lamp Amazon
Tool links are Amazon searches (affiliate links); manufacturer special tools may only be available from a dealer.
Source: Generac owner's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.