Generac 004582 / 12 DTA — Clean Spark Arrestor Screen
Maintenance
For the Generac 004582 / 12 DTA, from the Generac owner's manual.
Browse Generac generators & specs →
Before you start
- Do not use a defective screen.
Procedure
- Remove screen retaining bracket screw.
- Slide spark arrestor screen out from tail pipe.
- Inspect screen; replace if torn or damaged.
- Clean with commercial solvent if undamaged; replace screen and bracket.
Source: Generac owner's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.