Generac 004582 / 12 DTA — Adding Engine Oil
Maintenance · Engine crankcase
For the Generac 004582 / 12 DTA, from the Generac owner's manual.
Browse Generac generators & specs →
Before you start
- DO NOT OVERFILL.
Procedure
- Place generator on a level surface.
- Clean area around oil fill and remove cap/dipstick.
- Wipe dipstick clean.
- Slowly fill with recommended oil until full mark.
- Stop occasionally to check level; do not overfill.
- Install dipstick and oil fill cap; tighten securely.
Specs & values
- Oil capacity with filter change 1.5 Qts
- Oil capacity without filter change 1.2 Qts
Source: Generac owner's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.