Ford WSG-1068 — Installation of Water Heater Return Tube Assembly with by-pass Hose

Repair & overhaul

For the Ford WSG-1068, from the Ford service manual.

Browse Ford generators & specs →

Procedure

1. Lightly lubricate the o-rings prior to installing the water outlet tube.
2. Install the heater water outlet tube.
3. Install the water tube-mounting studs.
4. Install the lower and upper intake manifold; refer to Section 01.
5. Install rubber cap and clamp on outlet tube if not using LPG or cab heater.
6. Refill the cooling system.

Source: Ford service manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.

More Ford repair guides →