Ford WSG-1068 — Cylinder Head Temperature (CHT) Sensor - Replacement
Repair & overhaul · CHT sensor
For the Ford WSG-1068, from the Ford service manual.
Browse Ford generators & specs →
Before you start
- CAUTION: Do not over torque. May damage sensor.
Procedure
- Remove the upper and lower intake manifold together; refer to Section 01.
- Disconnect the electrical connector.
- Remove the CHT sensor.
- To install, reverse the removal procedure.
Specs & values
- Do not over torque; may damage sensor
Source: Ford service manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.