Ford WSG-1068 — Cooling System Filling
Maintenance
For the Ford WSG-1068, from the Ford service manual.
Browse Ford generators & specs →
Before you start
- Systems without degas bottle fill radiator up to 1 inch below the filler neck.
Procedure
- Add the proper engine coolant mixture to the degas bottle or radiator.
- Move the temperature blend selector to the full warm position when equipped.
- Run the engine until it reaches operating temperature.
- Add coolant until level is between the COOLANT FILL LEVEL marks.
- Turn off the engine and allow the cooling system to cool.
- Repeat steps until the radiator level is OK.
Source: Ford service manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.