Ford — Valve Rocker Arm (Camshaft) Cover Removal and Installation
Maintenance · Rocker arm cover
From a Ford service manual — check it applies to your exact model before use.
Browse Ford generators & specs →
Procedure
- Remove the air cleaner if necessary.
- Remove 10 screws from the cover and remove the cover.
- Clean the old gasket from the head and cover.
- With oil resistant sealer, install the gasket on the cover.
- Install the cover and gasket on the head with 10 screws loosely.
- Torque the 6 rear screws, then the two front screws.
Specs & values
- Rocker Arm Cover to Cylinder Head 4-7 ft-lb
Source: Ford service manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.