HomeRepair guidesV1 ..... Voltmeter, AC k 2% @ lOVAC, 1% @ 150V

Ford ES — V1 ..... Voltmeter, AC k 2% @ lOVAC, 1% @ 150V

For the Ford ES.

Browse Ford generators & specs →

Procedure

  1. 1. Remove voltage regulator from unit according to
  2. 2. Referring to Figure 5 and Table 1, connect test
  3. 3. Open switch in 120 VAC supply to VARIAC.

Specs & torque values

  • R1 ..................... .Resistor, 100-Ohm 400 W
  • voltage regulator assembly (VRA21)
  • these are the
  • big 100 ohm 400 watt resistor (Rl) serves as the field

Source: manual:0900-0335_Service Manual Ford Engine Detector I1_198207.pdf. Figures and steps are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.