Facts About Generators
GeneratorsDirectoryCompareRepairEnginesControllersPartsManufacturersGuides
Search models or part #
Home›Repair guides›Using an ohmmeter set at R x 100, test each stator

Ford ES — Using an ohmmeter set at R x 100, test each stator

For the Ford ES.

Browse Ford generators & specs →

Procedure

  1. 1. Inspect all wires for breaks, loose connections,
  2. 2. Remove wires from terminals at each end and

Specs & torque values

  • one megohm indicates a ground.
  • OHMS @ 20°C (68°F)
  • using an ohmmeter, check each wire end to end

Source: manual:0900-0335_Service Manual Ford Engine Detector I1_198207.pdf. Figures and steps are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.