Ford WSG-1068 — Radiator Hose - Removal

For the Ford WSG-1068.

Browse Ford generators & specs →

Procedure

1. 1.
2. Partially drain the cooling system. For additional
3. information, refer to Cooling System Draining, Filling
4. and Flushing in this section.
5. 2.
6. Disconnect the upper radiator hose.
7. 3.
8. Remove the water outlet connection.
9. • Remove the bolts.
10. • Remove the water outlet connection.
11. 4.
12. Remove the (B) O-ring seal and the (A) water
13. thermostat (8575).
14. • Discard the (B) O-ring seal.
15. !
16. REMOVAL AND INSTALLATION
17. A Thermostat
18. B O-ring Seal
19. A O-ring Seal
20. C Intake Manifold
21. B Thermostat

Source: manual:WSG1068 Sec. 05 Cooling.pdf. Figures and steps are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.