Home›Repair guides›Ford›Thermostat Test

Ford — Thermostat Test

Testing & diagnosis

From a Ford service manual covering: 140 CID, 2.3 LITRE, 2300 cc, LSG-423. Check it applies to your exact model before use.

Browse Ford generators & specs →

Procedure

  1. Remove the thermostat and immerse it in boiling water.
  2. Replace thermostat if it does not open at least 0.230 inch after one minute at 212 degrees F.
  3. To check for leakage, hold thermostat up to lighted background at room temperature.
  4. Leakage of light all around the valve indicates thermostat is unacceptable and should be replaced.

Specs & values

  • Opens at least 0.230 inch after one minute at 212 degrees F

Source: Ford service manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.

More Ford repair guides →