Ford ES — Some generators have ground connections to the frame. Check
For the Ford ES.
Browse Ford generators & specs →
Procedure
- 1. Inspect all wires for breaks, loose connections,
- 2. Remove wires from terminals at each end and
Specs & torque values
- Using an ohmmeter set at R x 100, test each stator
- one megohm indicates a ground.
- OHMS @ 20°C (68°F)
Source: manual:0900-0335_Service Manual Ford Engine Detector I1_198207.pdf. Figures and steps are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.