Ford — Replace PCV Valve
Maintenance · Engine
From a Ford service manual covering: 2WD, 4WD, Genie S-40. Check it applies to your exact model before use.
Browse Ford generators & specs →
Before you start
- Perform with engine off.
Procedure
- Remove 2 bolts from engine pivot plate, swing away.
- Remove hoses from PCV valve.
- Remove valve.
- Install new PCV valve. Connect hoses.
- Swing pivot plate back and replace bolts.
Source: Ford service manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.