Ford — Replace Gasoline Fuel Filter
Maintenance · Fuel system
From a Ford service manual covering: 2WD, 4WD, Genie S-40. Check it applies to your exact model before use.
Browse Ford generators & specs →
Before you start
- Fuel is combustible. Work in ventilated area.
- Perform with engine off.
Procedure
- Remove 2 bolts from engine pivot plate, swing away.
- Loosen filter bracket mounting bolt.
- Disconnect fuel hoses, slide filter out of bracket.
- Install new filter with flow arrow toward carburetor.
- Tighten bracket bolt, connect fuel hoses.
- Start machine and inspect for leaks.
- Swing pivot plate back and replace bolts.
Specs & values
- No part number listed
Source: Ford service manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.