Ford — Replace Engine Oil and Filter - Deutz Diesel Models
Maintenance
From a Ford service manual covering: 2WD, 4WD, Genie S-40. Check it applies to your exact model before use.
Browse Ford generators & specs →
Before you start
- Hot engine parts and oil may cause severe burns.
Procedure
- Remove oil filler cap.
- Pull drain hose, remove plug, drain oil.
- Install drain plug.
- Remove oil filter with wrench.
- Apply oil to new filter gasket, install filter 29561.
- Fill engine with new oil, install filler cap.
- Write date and hours on filter.
- Check for leaks.
Tools required
Tool links are Amazon searches (affiliate links); manufacturer special tools may only be available from a dealer.
Specs & values
- Oil capacity 8.5 quarts (8 liters)
- Interval 500 hours
Source: Ford service manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.