Facts About Generators
GeneratorsDirectoryCompareRepairEnginesControllersPartsManufacturersGuides
Search models or part #
Home›Repair guides›R x 100 scale. An ohmmeter reading of less than

Ford ES — R x 100 scale. An ohmmeter reading of less than

For the Ford ES.

Browse Ford generators & specs →

Procedure

  1. 14. Perform tests as follows:
  2. 2. Connect ohmmeter leads between F1+ and rotor
  3. 3. If meter registers, rotor is grounded.
  4. 4. Replace grounded rotor with new, identical part.

Specs & torque values

  • READING ON OHMMETER.
  • Resistance should be 0.5 to 0.6 ohms at 68" F (20" C).
  • Connect leads of ohmmeter between each CR lead

Source: manual:0900-0335_Service Manual Ford Engine Detector I1_198207.pdf. Figures and steps are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.