Ford — Oil Pan - Removal
Repair & overhaul
From a Ford service manual — check it applies to your exact model before use.
Applies to: Cummins/Onan WSG-1068 engine, Ford WSG-1068 engine
Procedure
- Disconnect the battery ground cable (14301).
- Partially drain the radiator (8005) and disconnect the upper radiator hose (8260) at the radiator.
- Drain the engine oil and remove the oil bypass filter (6714).
- Remove the nuts retaining the front engine support insulator (6038) to the front engine support bracket (6028).
- Remove the flywheel inspection plate.
- Remove the bolts and partially lower the oil pan (6675).
- Remove the two bolts and the nut retaining the oil pump screen cover and tube (6622) and let them drop into the oil pan.
- Remove the oil pan and oil pan gasket (6710) from the rear of the engine.
- Clean the mating surfaces and thoroughly clean the oil pan.
Source: Ford service manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.