Ford ES — OHMS @ 20°C (68°F)

For the Ford ES.

Browse Ford generators & specs →

Procedure

1. 1. Inspect all wires for breaks, loose connections,
2. 2. Remove wires from terminals at each end and
3. 3. Using an ohmmeter, check each wire against
4. 4. Reconnect or replace wires according to

Source: manual:0900-0335_Service Manual Ford Engine Detector I1_198207.pdf. Figures and steps are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.