Ford IC-200 — Suction Strainer Service
Maintenance
For the Ford IC-200, from the Ford owner's manual.
Applies to: Ford CSG-649 engine
Before you start
- Be sure the shut-off valve is opened fully before putting the pump back in operation
Procedure
- Remove four bolts holding housing to base and lift housing off base
- Remove element from base by turning counterclockwise
- Wash element in cleaning solvent and allow to drain dry
- Check by-pass valve in center of element for foreign matter
- Screw element back into filter base and reassemble
Source: Ford owner's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.