Ford — Installation

A Ford service procedure — check it applies to your exact model before use.

Browse Ford generators & specs →

Procedure

1. Remove and discard carburetor gasket.
2. Connect throttle linkage and the choke cable. Check
3. Connect fuel line and distributor vacuum line.
4. Start engine and adjust idle speed and idle fuel
5. Install the air cleaner.
6. Disconnect the fuel inlet, outlet and fuel tank return
7. Remove fuel pump retaining screws. Lift off pump and

Source: manual:194-216 Ford LSG-423 2.3L Industrial Engine Service manual (May1986).pdf. Figures and steps are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.