Ford — LL MP EXTENDABLE AXLE ELECTRO-PROPORTIONAL SERVICE MANUAL

A Ford service procedure — check it applies to your exact model before use.

Browse Ford generators & specs →

Procedure

1. 1. Place cylinder in a horizontal position.
2. 2. Stretch outthe replacement ropes and measure
3. the free length of each rope.
4. A. Extend ropes should be 5/8" (16 mm) in
5. diameter and 705" (17.907 M) long.
6. B. Retract ropes should be 3/8" (10 mm) in
7. diameter and 411" (10.439 M) long.
8. 3. Lubricate all of the wire ropes (Chain and Cable
9. Fluid Lubricant #135 35 or equivalent).
10. 4. Route threaded end of the extend wire ropes
11. around the 12" sheaves (from top down) on
12. cylinder housing.

Source: manual:89-103317.pdf. Figures and steps are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.