Ford — Cooling System Fill And Authorized Modification Label
Repair & overhaul
From a Ford service manual — check it applies to your exact model before use.
Browse Ford generators & specs →
Procedure
- Fill the cooling system. Refer to WSM Section 303-03 to determine correct coolant concentration based on the climate.
- Fill out FPS-8262 Authorized Modification Label with the text: 'Use Only Motorcraft® VC-13-G Yellow Coolant'.
- Clean the coolant reservoir surface with isopropyl alcohol or equivalent and apply the Authorized Modification Label.
- Advise the owner or driver that the unit is using a different coolant (Motorcraft® VC-13-G Yellow Coolant) for the environmental conditions.
Tools required
- isopropyl alcohol Amazon
Tool links are Amazon searches (affiliate links); manufacturer special tools may only be available from a dealer.
Specs & values
- Motorcraft® VC-13-G Yellow Coolant
Source: Ford service manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.