Facts About Generators
GeneratorsDirectoryCompareRepairEnginesControllersPartsManufacturersGuides
Search models or part #
Home›Repair guides›Check load for ground faults and correct as

Ford ES — Check load for ground faults and correct as

For the Ford ES.

Browse Ford generators & specs →

Procedure

  1. 1. If set has a voltage adjust potentiometer (R22) on
  2. 2. With unit running at no load, turn generator vol-
  3. 1. With generator set running at no load, turn poten-
  4. 2. Turn R27 clockwise slowly until voltage first sta-

Specs & torque values

  • VOLTAGE CALIBRATION ADJUSTMENT
  • AC voltmeter to observe generator output voltage
  • and to set the correct no load voltage. If voltage regu-
  • To obtain the correct output voltage, proceed as
  • wise to increase output voltage
  • turn R26 coun-

Source: manual:0900-0335_Service Manual Ford Engine Detector I1_198207.pdf. Figures and steps are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.