Ford — Camshaft Timing - Adjusting
Adjustments · Timing belt
From a Ford service manual covering: 140 CID, 2.3 LITRE, 2300 cc, LSG-423. Check it applies to your exact model before use.
Browse Ford generators & specs →
Procedure
- Remove the timing belt outer cover.
- Loosen belt tensioner adjustment screw, release belt tensioner, tighten screw to hold released.
- Remove crankshaft damper and belt guide.
- Remove drive belt and inspect for wear or damage; replace if damaged.
- Position crankshaft sprocket and camshaft sprocket as shown.
- Install timing belt counterclockwise over auxiliary and camshaft sprockets; align belt fore and aft.
- Loosen tensioner bolt to allow tensioner to move against belt.
- Rotate crankshaft two complete turns in normal rotation and torque tensioner bolts to specification.
- Re-check alignment of timing marks.
- Install crankshaft damper and belt guide.
- Install timing belt outer cover and spark plugs.
- Start engine and adjust ignition timing to specification.
Tools required
- Belt tensioner tool Amazon
Tool links are Amazon searches (affiliate links); manufacturer special tools may only be available from a dealer.
Source: Ford service manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.