Facts About Generators
GeneratorsDirectoryCompareRepairEnginesControllersPartsManufacturersGuides
Search models or part #
Home›Repair guides›Bench Check

Ford ES — Bench Check

For the Ford ES.

Browse Ford generators & specs →

Procedure

  1. 1. Remove voltage regulator from unit according to
  2. 2. Referring to Figure 5 and Table 1, connect test
  3. 3. Open switch in 120 VAC supply to VARIAC.
  4. 4. Plug VARiAC into 120 VAC source.
  5. 5. Proceed with checkout according to steps in

Specs & torque values

  • procedure given for voltage regulator replace-
  • TABLE 1. VOLTAGE REGULATOR CHECKOUT

Source: manual:0900-0335_Service Manual Ford Engine Detector I1_198207.pdf. Figures and steps are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.