Ford — Assembly of Bowl to Throttle Body

A Ford service procedure — check it applies to your exact model before use.

Procedure

1. Place bowl to body gasket (24) on machined surface of throttle body.
2. Position bowl assembly on throttle body, being careful not to damage floats, and align holes in bowl with holes in gasket and throttle body. Install two long and one short bowl to body screws (32) and (33) with lockwashers (34) and tighten screws evenly and securely. Adjustments Final adjustment should be made on the engine with the spec- in place and the engine at normal operating ified air cleaner temperature.

Source: manual:ford_vsg411_vsg413_shop_opm.pdf. Figures and steps are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.