Ford — Generator Removal from Engine

A Ford service procedure — check it applies to your exact model before use.

Browse Ford generators & specs →

Procedure

1. Disconnect battery ground cable (14301).
2. Remove snow/ice shield.
3. Disconnect the generator voltage regulator wiring (14305) to the voltage regulator.
4. Remove wiring connector bracket.
5. Relieve the tension of the drive belt tensioner (613209) and remove the drive belt.
6. Remove the bolts holding the generator to the generator bracket (10A313).
7. Remove the generator from the generator bracket.

Source: manual:WSG1068 Sec. 06 Charging.pdf. Figures and steps are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.