Ford — Adjusting Camshaft Timing

Adjustments · Timing belt

From a Ford service manual — check it applies to your exact model before use.

Browse Ford generators & specs →

Procedure

1. Remove the timing belt outer cover.
2. Loosen the belt tensioner adjustment screw, release the tensioner and tighten the screw to hold it released.
3. Remove the crankshaft damper and belt guide.
4. Remove the drive belt and inspect for wear or damage; replace if damaged.
5. Position the crankshaft sprocket and camshaft sprocket; set the distributor rotor to No. 1 firing position.
6. Install the timing belt over the crankshaft sprocket then counterclockwise over the auxiliary and camshaft sprockets.
7. Loosen the tensioner adjustment bolt to allow the tensioner to move against the belt; remove the spark plugs.
8. Rotate the crankshaft two complete turns in normal rotation to remove slack.
9. Torque tensioner adjustment and pivot bolts to specification; re-check alignment of the timing marks.
10. Install the crankshaft damper and belt guide.
11. Install the timing belt outer cover and the spark plugs.
12. Start the engine and check the ignition timing; adjust to specification.

Source: Ford service manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.

More Ford repair guides →