Ford — 3. Check all assembly clearances and correct as

A Ford service procedure — check it applies to your exact model before use.

Browse Ford generators & specs →

Procedure

1. 02-66
2. 02-66
3. 1. Position the camshaft so that the base circle of
4. 2. Using Valve Spring Compressor T95T-6565-A,
5. 3. Remove the roller finger follower and inspect for
6. 4.
7. 5.
8. 6.
9. 7.
10. 02-67
11. 02-67
12. 3.
13. 4.
14. 1. Remove the rubber access cap in front of the
15. 2. Rotate crankshaft so that number one cylinder is
16. 02-18
17. 02-18
18. 1. Remove the outer timing belt cover as outlined in
19. 13. Align triangle on camshaft sprocket with triangle
20. 14. Install timing belt over crankshaft sprocket (6306).

Source: manual:FORD LRG425 Service Manual.pdf. Figures and steps are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.