Ford 2.3 / LRG-423 — Valve Cover and Gasket Removal

Maintenance

For the Ford 2.3 / LRG-423, from the Ford service manual.

Applies to: Ford LRG-423 engine

Procedure

1. Remove ignition cables out of ignition coil and place to the side.
2. Remove bolts and valve cover (6582).
3. Remove valve cover gasket (6584) from valve cover.
4. If necessary, remove oil filler cap (6766).

Full service-parts list: Ford LRG-423 engine →

Source: Ford service manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.

More Ford repair guides →