Facts About Generators
GeneratorsDirectoryCompareRepairEnginesControllersPartsManufacturersGuides
Search models or part #
Home›Repair guides›Actuating Lever Cover Plate Disassembly

Foleyengines.Com — Actuating Lever Cover Plate Disassembly

A Foleyengines.Com service procedure — check it applies to your exact model before use.

Browse Foleyengines.Com generators & specs →

Procedure

  1. Set actuating lever to neutral position.
  2. Remove hex nuts from cover plate using 13 mm spanner.
  3. Take off spring washers.
  4. Remove cover plate assembly, lever and actuating cam.
  5. Remove screw from lever.
  6. Pull off lever.
  7. Remove actuating cam sealing ring (for all models except HBW 35-100).

Tools required

  • 13 mm spanner (wrench)

Source: manual:HBW35.ZF5ZF10ZF15ReparManual.Complete.Reduced_0.pdf. Figures and steps are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.