Fischer Panda — Ventilating the Fuel System (installation)
Installation
From a Fischer Panda owner's manual covering: Panda 16, Panda 18, Panda 24-30, Panda 33-42, Panda 6000, Panda 6000-8000, Panda 9000-14000. Check it applies to your exact model before use.
Applies to: Kubota Z482 engine
Procedure
- Switch main power switch on control panel ON.
- Push failure bypass switch and hold tight.
- After the fuel pump has run 3 to 4 minutes, unscrew the bleeding screw of the solenoid valve.
- Screw in the air vent screw when fuel runs out without bubbles, then release the switch.
- Start the generator with the START button.
Full service-parts list: Kubota Z482 engine →
Source: Fischer Panda owner's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.