Home›Repair guides›Fischer Panda›Re-magnetising the rotor

Fischer Panda — Re-magnetising the rotor

Repair & overhaul · generator rotor

From a Fischer Panda owner's manual covering: 12000NE-15000NE, Panda 12.000NE, Panda 14.000NE, Panda 15.000NE. Check it applies to your exact model before use.

Browse Fischer Panda generators & specs →

Before you start

  • Do not use battery bank or generator starter battery; could damage winding.

Procedure

  1. Switch off shore power and any AC source.
  2. Switch generator off; starter may not be operated.
  3. Switch power source selector to generator.
  4. Connect two poles of a 9 Volt battery to plug socket or contacts briefly (1-2 seconds).
  5. Do not use battery bank or starter battery.
  6. Generator can normally be started.

Tools required

Tool links are Amazon searches (affiliate links); manufacturer special tools may only be available from a dealer.

Specs & values

  • DC voltage applied only for 1-2 seconds

Source: Fischer Panda owner's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.

More Fischer Panda repair guides →