Fischer Panda 12mini / Panda 12 mini PMS Digital — Measure coil resistance
Testing & diagnosis · generator windings
For the Fischer Panda 12mini / Panda 12 mini PMS Digital, from the Fischer Panda service manual.
Applies to: Fischer Panda MINI, Fischer Panda Panda 12 mini PMS Digital, Kubota D722 engine
Procedure
- Use instrument suitable for low impedance.
- Short test prods and confirm 0.00 ohms.
- Separate prods and confirm overflow.
- Measure resistance within individual windings.
- Compare values; large deviations indicate coil short-circuit.
Tools required
- Low impedance measuring instrument Amazon
Tool links are Amazon searches (affiliate links); manufacturer special tools may only be available from a dealer.
Specs & values
- Ohmic resistance H1/H2 0.2 Ohm; Z1/Z2 0.5 Ohm
Full service-parts list: Fischer Panda MINI →, Fischer Panda Panda 12 mini PMS Digital →, Kubota D722 engine →
Source: Fischer Panda service manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.