Fischer Panda 12mini / Panda 12 mini PMS Digital — Insulation test
Testing & diagnosis · AC electrical system
For the Fischer Panda 12mini / Panda 12 mini PMS Digital, from the Fischer Panda service manual.
Applies to: Fischer Panda MINI, Fischer Panda Panda 12 mini PMS Digital, Kubota D722 engine
Before you start
- Electrical installation only by trained and tested personnel.
Procedure
- Switch off all on-board electrical devices.
- Start generator.
- Measure AC voltage with voltmeter between generator housing and AC-Control box.
- Measure AC voltage between generator housing and ground.
- Voltage must not exceed 50 mV.
- Check safety systems and leakage current relay if installed.
- Check individual generated phases between each other and phase to ground.
Tools required
- Voltmeter Amazon
Tool links are Amazon searches (affiliate links); manufacturer special tools may only be available from a dealer.
Specs & values
- Maximum 50 mV
Full service-parts list: Fischer Panda MINI →, Fischer Panda Panda 12 mini PMS Digital →, Kubota D722 engine →
Source: Fischer Panda service manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.