Fischer Panda 12mini / Panda 12 mini PMS Digital — Installation of the speed sensor
Installation
For the Fischer Panda 12mini / Panda 12 mini PMS Digital, from the Fischer Panda owner's manual.
Applies to: Fischer Panda Panda 12 mini PMS Digital, Kubota D722 engine
Procedure
- Align speed sensor tip with tip of a gear tooth.
- Screw in until it touches tooth tip; do not screw into tooth root.
- Turn anticlockwise by half a turn (0.3 to 0.8 mm).
- Hold with counter nut.
Specs & values
- Air gap 0.3 to 0.8 mm
Full service-parts list: Fischer Panda Panda 12 mini PMS Digital →, Kubota D722 engine →
Source: Fischer Panda owner's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.