Fischer Panda 12mini / Panda 12 mini PMS Digital — Install speed sensor
Installation
For the Fischer Panda 12mini / Panda 12 mini PMS Digital, from the Fischer Panda service manual.
Applies to: Fischer Panda MINI, Fischer Panda Panda 12 mini PMS Digital, Kubota D722 engine
Procedure
- Align speed sensor tip with tip of gear tooth.
- Screw in until it touches tooth tip; do not screw into tooth root.
- Turn screw anticlockwise by half a turn (0.3 to 0.8 mm).
- Hold with counter nut.
Tools required
- Spanner Amazon
Tool links are Amazon searches (affiliate links); manufacturer special tools may only be available from a dealer.
Specs & values
- Air gap 0.3 to 0.8 mm
Full service-parts list: Fischer Panda MINI →, Fischer Panda Panda 12 mini PMS Digital →, Kubota D722 engine →
Source: Fischer Panda service manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.