Fischer Panda 12mini / Panda 12 mini PMS Digital — Exchange V-belt
Maintenance · internal cooling water pump drive
For the Fischer Panda 12mini / Panda 12 mini PMS Digital, from the Fischer Panda service manual.
Applies to: Fischer Panda MINI, Fischer Panda Panda 12 mini PMS Digital, Kubota D722 engine
Procedure
- Loosen fixing screw above alternator.
- Loosen fixing screw below alternator slightly.
- Press alternator toward thermostat housing.
- Change V-belt (type XPZ 850).
- Pull alternator back to tension belt.
- Check belt deflection approx. 1 cm with thumb.
- Tighten fixing screws above and below alternator.
Tools required
- Spanner Amazon
Tool links are Amazon searches (affiliate links); manufacturer special tools may only be available from a dealer.
Specs & values
- V-belt type XPZ 850
- Check interval 100 operating hours
- Deflection approx. 1 cm
Full service-parts list: Fischer Panda MINI →, Fischer Panda Panda 12 mini PMS Digital →, Kubota D722 engine →
Source: Fischer Panda service manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.